Setting Location; Setting Daylight Saving Time - Lutron Electronics QSGRJ-3P Installation And Operation Manual

Timeclock Operation (continued)

Setting Location

Main menu 1. Enter programming mode.
2. Use the Master buttons to highlight
Timeclock
Timeclock
"Timeclock" and press the "OK" button
Scene setup
to accept.
3. Use the Master buttons to highlight
"Location" and press the "OK" button
Timeclock
to accept.
4. Use the Master buttons to set your
Time & date
location by either country and city
Location
or latitude and longitude. Press the
"OK" button to accept.
5. Use the Master buttons to highlight the
Location by
country and press the "OK" button to
accept. Repeat for the state and closest
Country, City
city.
Lat/Longitude
6. The info screen will confirm that your
time and date have been saved.
7. Exit programming mode.
Country
08 : 00
USA
State
Pennsylvania
City
Philadelphia
®
Saved

Setting Daylight Saving Time

1. Enter programming mode and
Timeclock
select "Timeclock." Use the Master
Location
buttons to highlight "Set DST" and
press the "OK" button to accept.
Set DST
2. Use the Master buttons to highlight
"Yes" if your location observes
daylight saving time, or "No" if it
DST
does not. Press the "OK" button to
accept.
: 00
Yes
3. If yes, use the Master buttons to
choose either "USA 2007" (the
second Sunday in March to the first
Sunday in November), or "Other."
For "Other," follow the screens to
set start and end dates and amount
of time.
4. Press the "OK" button to accept.
The info screen will confirm that
your time and date have been
saved.
5. Exit programming mode.
GRAFIK Eye QS Control Unit Installation and Operation Guide 53
®
Master
buttons
OK
"OK"
button