Scanner platen glass cover assembly removal (M
1. Remove the ADF unit assembly. See
2. Remove the scanner cover, left. See
3. Remove the scanner cover, right. See
4. Remove the scanner cover, front. See
Note: Remove the operator panel screw cover strip to access the 6th screw securing the platen glass cover
assembly.
Note: It is not necessary to remove the operator panel for platen glass removal.
5. Remove six screws (A) securing the scanner platen glass cover to the assembly.
6. Lift and remove the scanner platen glass cover assembly.
B790)
"ADF unit assembly removal (MB790)" on page
"Scanner cover, left removal (MB790)" on page
"Scanner cover, right removal (MB790)" on page 4-136
"Scanner cover, front removal (MB790)" on page
7462
4-85.
4-135.
4-137.
4-139
Repair information
Previous
Next
Go Back