Lexmark MB790MFP Service Manual page 95

7462
Error
code or
message
250.03 Sensor (input) late
jam
Source = MPF
250.06 Sensor (input) late
jam
Source = MPF
250.07 Sensor (input) late
jam
Source = MPF
250.08 Sensor (input) late
jam
Source = MPF
250.09 Sensor (input) late
jam
Source = MPF
250.10 Sensor (input) late
jam
Source = MPF
250.11 Sensor (input) late
jam
Source = MPF
260.00 Envelope feeder area
jam
2-58
Service Manual
Error contents
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is jammed in the
envelope feeder area.
Description/Action Possible repair actions
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-128.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-128.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-128.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-128.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-128.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-128.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-128.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check media for proper
installation.
4. Check for obstructions in
media path.
5. Go to sensor (input) service
check. See "Sensor
(input) service check" on
page 2-108.
Previous
Next
Go Back