Table of Contents
Advertisement
ADF turn guide removal
1. Remove the ADF pinch roll assembly. See
2. Remove the ADF separator torque limiter assembly. See
removal" on page
3. Remove the two screws (A) from the front side. Be sure to secure the ground strap by the upper turn guide
screw when reinstalling.
4. Using a flat-blade screwdriver, unfasten the hook securing the separator guide to the turn guide.
Note: Upon reassembly, reattach the hook by pressing with your fingers until it snaps into place.
"ADF pinch roll assembly removal" on page
4-63.
"ADF separator torque limiter assembly
A
Repair information
7462
Previous
4-72.
Next
Go Back
4-73
Advertisement
Table of Contents
