Table of Contents
Advertisement
7462
ADF platen cushion removal
1. Lift the ADF unit assembly.
2. Unfasten the velcro.
3. Remove the ADF platen cushion.
ADF lower door assembly removal
1. Remove the ADF platen cushion. See
2. Open the ADF bottom door by pressing the green tab (A) on the underside of the front of the ADF unit
assembly.
3. Remove the screw (B) securing the ground wire to the ADF unit assembly.
4. Remove the two screws (C) securing the bottom door hinge plate.
A
5. Remove the hinge plate and pull the ADF lower door assembly and remove.
4-68
Service Manual
"ADF platen cushion removal" on page
B
C
4-68.
Previous
Next
Go Back
Advertisement
Table of Contents
