Table of Contents
Advertisement
7462
Sensor (ADF document set) removal
Previous
1. Remove the ADF document tray assembly. See
"ADF document tray assembly removal" on
page
4-65.
2. Remove the three screws (A) securing the separator guide to the ADF frame.
A
Next
Go Back
3. Remove the sensor (ADF document set) harness.
4. Remove the two screws (B) securing the sensor (ADF document set) bracket to the ADF frame.
5. Remove the sensor (ADF document set) and bracket.
4-83
Repair information
Advertisement
Table of Contents
