Sd Card Insertion - Safety Vision OBSERVER 4100 User Manual

SD Card Insertion

To insert an SD card into the Observer
4100:
1. Insert the key and turn it
counterclockwise.
2. Push the SD card slot door firmly to
the right.
3. Insert an SD card into the Observer
4100 label-side up, with the notch to the
right, until it clicks in place.
4. Push the SD card slot door to the left
firmly and confirm it is closed all the way.
5. Insert the key and turn it clockwise to
lock the door.
Do not force the SD card into the
Observer 4100 upside down or
backwards.
To remove the SD card, follow the
procedure above, press the card into the
slot until it clicks, then allow it to spring
out.
Do not remove the SD card until the
Observer 4100 is turned off.
Important Notice: Proper maintenance procedures for
digital media require that recorded data be reviewed on
a regular basis to ensure the DVR is operating correctly.
Consult with your fleet or vehicle maintenance manager
to implement a regular data review policy that fits with
your facility routines to ensure data integrity.
OBSERVER 4100 USER GUIDE
3