Sd Card Removal/Insertion - Safety Vision Observer 4000 User Manual

6

SD Card Removal/Insertion

Do not force the SD card into the slot
upside down or backwards.
Ensure the SD card's write protection
slider is in the "unlocked" position.
Do not remove the SD card until the
DVR is turned off.
1.
Insert the key into the faceplate
lock and turn it counter-clockwise.
2.
Release the faceplate latch.
3.
Open the faceplate.
Opening the faceplate automatically
turns the DVR off.
4.
Wait until the DVR has completely
powered down (PWR status LED
has turned off).
5.
Flip down the SD card slot door.
6.
Insert an SD card into the SD card
slot label-side up, with the notch to
the right, until it clicks in place.
To remove the SD card, press the SD
card as far as it will go in the slot, then
allow it to "spring" out.
OBSERVER 4000 USER GUIDE