Safety Vision OBSERVER 4100 User Manual page 41

Speed
The Speed menu controls the speed type (SPDL
and SPDO) events.
Use the remote control to configure the following
options:
SPEED SOURCE: Select VEHICLE to obtain vehicle
speed data from the vehicle's own speedometer,
or GPS to obtain this data from the GPS signal.
SPEED UNIT: Select MPH to use miles per hour or
KPH to use kilometers per hour.
ALARM SETTING: Select the following options for
LOWSPEED and OVERSPEED:
ENABLE: Select ON to enable this SPEED event.
Select OFF to disable it.
THRESHOLD: Use the number keys on the remote
control to enter the speed at which the event is
triggered.
ALARM: Select ON to enable the ALM LED on the
front of the Observer 4100 when the THRESHOLD
speed is reached and an event is triggered. This
LED continues to flash after an event is triggered
until the configuration menus are accessed.
LOCK: Select ON to lock the video of the recorded
event when the THRESHOLD speed is reached (not
allowing it to be overwritten).
OBSERVER 4100 USER GUIDE
For more information about
connecting the Observer 4100 to a
vehicle speedometer, please contact
Safety Vision Technical Support.
39