Safety Vision OBSERVER 4100 User Manual page 48

OBSERVER 4100 USER GUIDE
46
Ext. Com. Setup
The Ext. Com. Setup menu enables optional
connections to a control panel, acceleration
sensor, or panic button.
Use the remote control to configure the following
for each individual input:
COM1: Select the device connected to the
232RXD-1 and 232TXD-1 terminals. Select NONE
if nothing is connected to these terminals.
COM2: Select the device connected to the
232RXD-2 and 232TXD-2 terminals. Select NONE
if nothing is connected to these terminals.
COM3: Select the device connected to the 485A-1
and 485B-1 terminals. Select NONE if nothing is
connected to these terminals.
COM4: Select the device connected to the 485A-2
and 485B-2 terminals. Select NONE if nothing is
connected to these terminals.