Appendix A: Web Application Manager - Safety Vision OBSERVER 4100 User Manual

Appendix A: Web
Application Manager
The Observer 4100 includes a web server, called the
Web Application Manager, that can be accessed
with a Windows based PC and browser. The Web
Application Manager includes Live View, Playback,
Setup (Configuration) and Maintenance menus.
It provides much of the same functionality as an
external monitor and remote control when these
accessories are not available or practical.
Use the following procedure to access the Web
Application Manager:
1.
Determine the IP Address of the Observer
4100 on the Local Network menu.
This can be accomplished beforehand with an
external monitor and remote control. The default
IP address is 192.168.002.100.
2.
Connect the PC to the DVR's RJ-45 port with a
standard Ethernet cable.
3.
Ensure the DVR is receiving power and has
started up.
4.
Set a sequential static IP address for the LAN
connection connected to the DVR.
For example, if the DVR's IP address is
192.168.002.100, set a static IP address of
192.168.002.101.
In Windows, this can be accomplished in the
Internet Protocol (TCP/IP) Properties window,
accessed through the properties of the Local Area
Connection.
5.
On a web browser, navigate to the DVR's IP
address.
6.
Run any Active X controls, such as MDvrOcx.
ocx and SVT MDVR Web, if and when
prompted by your web browser.
The Login screen appears.
7.
If the DVR's password is enabled, enter it in
the PASSWORD field and click LOGIN. (If the
password is not enabled, simply click LOGIN.)
The Web Application Manager launches.
OBSERVER 4100 USER GUIDE
51