Related Manuals for Safety Vision OBSERVER 4116
Summary of Contents for Safety Vision OBSERVER 4116
- Page 1 Observer™ 4116 Nvr Hardware User GUide For system configuration, please refer to the Observer Series Configuration Guide.
- Page 2 However, because of Safety Vision’s policy of continual product improvement, Safety Vision reserves the right to amend the information in this document at any time without prior notice. This material is confidential and the property of Safety Vision.
-
Page 3: Table Of Contents
4116 Hvr Hardware User GUide Contents Main Wiring Diagram Installation Flat Mount Security Cover Hard Drive Removal SD Card Insertion /Removal Components Front Panel Rear Panel Appendix A: Specifications Appendix B: Dimensions FCC Compliance Statement... - Page 4 4116 Hvr Hardware User GUide The Observer Series Recorders consists of two (2) separate user guides: 1. Hardware User Guide 2. Configuration User Guide This document is the Hardware User Guide. It provides wiring, installation, and components description. For system configuration, please refer to the Observer Series Configuration Guide.
-
Page 5: Main Wiring Diagram
4116 Hvr Hardware User GUide Main Wiring Diagram CAN BOX connections COLOR BLACK 485B-1 GREEN 485B-1 WHITE... -
Page 6: Installation
4116 Hvr Hardware User GUide Installation Flat Mount Secure the NVR to the surface with self-tapping screws or rivets. Ensure that the front panel of the NVR remains accessible and there is a minimum 2.5 inches of clearance for cables.. -
Page 7: Hard Drive Removal
4116 Hvr Hardware User GUide Hard Drive Removal To remove the hard drive from the NVR: Ensure the NVR is powered off. 2. Release the two faceplate security tabs on the side of the enclosure. 3. Insert the key into the faceplate lock and turn it clockwise. -
Page 8: Sd Card Insertion /Removal
4116 Hvr Hardware User GUide SD Card Insertion /Removal Do not force the SD card into the slot upside down or backwards. Ensure the SD card’s write protection slider is in the “unlocked” position. Do not remove the SD card until the NVR is turned off. -
Page 9: Components
4116 Hvr Hardware User GUide Components Front Panel 1 - Removable Hard Drive The hard disk drive (HDD) provides the main storage for recorded data. 2 - USB Port Insert a USB flash drive to download events quickly without having to remove the SD card or hard drive, or upload firmware updates. -
Page 10: Rear Panel
4116 Hvr Hardware User GUide Rear Panel Power Port Connection for the main power harness. WiFi Antenna Port Connection to an external antenna for the internal WiFi module. Panel Port Connection for optional CP4-series monitors. IPC Ports Connections for up to 16 network IP cameras. -
Page 11: Appendix A: Specifications
4116 Hvr Hardware User GUide Appendix A: Specifications SPECIFICATIONS Part No. 4116-NVR OS Support Linux 3.0.8 Access Control CP4, web interface (WiFi or interface), mouse (wireless) Cameras Supported Up to 16 IP cameras 1 video output channel and 1 audio output channel... -
Page 12: Appendix B: Dimensions
4116 Hvr Hardware User GUide Appendix B: Dimensions... -
Page 13: Fcc Compliance Statement
4116 Hvr Hardware User GUide FCC Compliance Statement NOTE This device has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. - Page 14 NOTES...
- Page 15 NOTES...
- Page 16 NOTES...
- Page 17 NOTES...
- Page 18 NOTES...
- Page 19 NOTES...
- Page 20 NOTES...
- Page 21 NOTES...
- Page 22 NOTES...
- Page 23 Corporate Headquarters 6100 W. Sam Houston Pkwy. N. Houston, TX 77041-5113 Main: 713.896.6600 Toll Free: 800.880.8855 Fax: 713.896.6640 www.safetyvision.com...
Need help?
Do you have a question about the OBSERVER 4116 and is the answer not in the manual?
Questions and answers