Hdd/Sd - Safety Vision ICOP PRO HD HVR User Manual

51

HDD/SD

• Select the Low Space option to enable HDD/SD
alarms. An alarm is triggered when the selected
storage device is approaching low available space
• Alarm type: Select either Sensor (When a Sensor
alarm is triggered, it is recorded in video as metadata
only), or Event (When an Event alarm is triggered, it
marks recorded video as 'Alarm Video' with metadata
included).
• Trigger: Tap the Setup button to configure the
parameters specific to this type of alarm (see
Trigger Setup below)
Then tap the Save button.
Trigger Setup
Tap the Setup button under the Trigger field to display
the setup screen to configure the parameters specific to
the HDD/SD alarms .
Select the storage device you want to configure the
HDD/SD alarm for (only the storage device(s) present
in the recorder will be displayed in the setup screen to
configure).
Enter a percentage (between 0% and 100%) of capacity
that the selected storage device must obtain to trigger
an alarm when approaching low available space.
Then tap the OK button.
Then tap the Save button.
ICOP PRO HD HVR USER GUIDE