Sd Card Insertion - Safety Vision RouteRecorder 4C SD SS User Manual

Status LED Status when Illuminated
SD An SD card is inserted (blinking).
ERR An error may have occured.
GPS The optional GPS card is installed and powered on.
The unit is interfacing with an optional ethernet device.
NET
The unit is receiving power.
PWR
The unit is recording video.
REC
One or more cameras have become detached or are malfunctioning.
VLOSS
ALM An alarm has occured (as configured in the Configuration Menu).

SD Card Insertion

To insert an SD card into the
RouteRecorder 4C SD SS:
1. Insert the key and turn it clockwise.
2. Pull outward on the door tab.
3. Insert an SD card into the
RouteRecorder 4C SD SS label-side up,
with the notch to the right, until it clicks
in place.
do not force the Sd card into the
RouteRecorder 4c Sd SS upside down
or backwards.
To remove the SD card, press the card
into the slot until it clicks, then allow it to
spring out.
3