Sd Card Insertion - Safety Vision SVR-4100 User Manual

3

SD Card Insertion

To insert an SD card into the SVR-4100:
1. Insert the key and turn it
counterclockwise.
2. Push the SD card slot door firmly to
the right.
3. Insert an SD card into the SVR-4100
label-side up, with the notch to the right,
until it clicks in place.
4. Push the SD card slot door to the left
firmly and confirm it is closed all the way.
5. Insert the key and turn it clockwise to
lock the door.
do not force the Sd card into the SvR-
4100 upside down or backwards.
To remove the SD card, follow the
procedure above, press the card into the
slot until it clicks, then allow it to spring
out.
do not remove the Sd card until the
SvR-4100 is turned off.