Safety Vision OBSERVER 4100 User Manual page 45

OBSERVER 4100 USER GUIDE
43
Low Voltage Protection
The Low Voltage Protection menu controls the
voltage threshold before the Observer 4100 shuts
down automatically to protect itself.
Use the remote control to configure the
following:
ENABLE: Select ON to enable voltage protection.
LOW VOLTAGE: Enter the minimum voltage, in
volts, that the Observer 4100 can receive before it
automatically disconnects from the CMS or shuts
down.
VOLTAGE OF START: Enter the voltage, in volts,
that the vehicle typically drops to during startup
(the ignition key is turned).
INTERNAL TIME FOR CMS: Select the time, in
minutes, that the Observer 4100 can continue to
receive the voltage indicated in the VOLTAGE field
before disconnecting from the CMS. SHUT DOWN
DELAY: Select the time, in minutes, that the Observer 4100
can continue to receive the voltage indicated in the LOW
VOLTAGE field before automatically shutting down.