Setting the Date and Time
Setting the date and time is important, as this information will identify saved
videos and snapshots when viewed on a PC.
Pressing the Function Button once illuminates the LCD Display's backlight.
Pressing it again will cycle between the date and time.
To set the date or time:
1.
Press the Function Button until the date or time is shown on the LCD
Display ("Y", "M", and "D" appears at the bottom for the date, "H", "M"
and "S" appears for the time).
2.
Hold the Function Button for two seconds until the first value begins to
flash.
3.
Use the Record and Snapshot Buttons to increase or decrease the value.
4.
Press the Function Button again to advance to the next value.
5.
Repeat the process for all three values.
6.
After the third value is set, press the Function Button one last time to
finalize the date or time.
Inserting the miniSD™ Card
Insert the miniSD™ card in the Interface Panel as shown below:
9