Remote Control - Safety Vision OBSERVER 4100 User Manual

Remote Control

The Observer 4100 remote control is used to navigate
through the configuration menus or to control video
playback on an external monitor. Point the remote control
at the IR receiver on the front panel of the Observer 4100 to
make selections.
Power - Use this key to power the Observer 4100 on or off.
Login/Lock - Quickly access the login screen or secure the
unit when already logged in. Login values can be set in the
configuration menu.
1 - Numeric Keypad
- Use the numeric keypad to input
numerical values when configuring the system. Additionally,
you can use the 1, 2, 3, and 4 keys to display that numbered
video channel during video playback. Press the 0 key to
switch between displaying individual channels and a quad
view.
2 - + and - Keys
- Use the + and - keys to increase or
decrease values by one.
3 - Navigation Buttons
navigate between input fields or menu selections when
configuring the system. Use the Enter key in the center of
the arrow keys to make selections. During video playback
the left and right arrow keys can be used to rewind or fast-
forward.
4 - Additional Remote Control Keys
VGA - Switch the output mode of the external monitor to
VGA1, VGA2, or VGA3.
Video - Switch between VGA output and the front composite
external monitor output.
Brightness, Contrast, and Color - Press this key repeatedly
to toggle between brightness, contrast, and color options for
each individual channel. Use the + and - keys to adjust each
value.
Setup - Quickly access the configuration menu. Login may
be required.
Exit - Quickly return to the previous menu while viewing
configuration menus. Pressing this key on the main
configuration menu returns to the live view.
Play - Press this key to resume regular speed video playback
when video is paused or stopped.
OBSERVER 4100 USER GUIDE
- Use the four arrow keys to
Slow - Press this key to slow down video playback.
GoTo - Press this key to quickly access video recorded at a
certain time. When playing back video, press this key and
input the desired time. Press Play to begin video playback.
Stop - Press this key to manually stop video recording.
Record - Press this key to manually begin recording again
once it has stopped.
F1 - Press this key, at the bottom left of the remote, to
automatically export all recorded marked events to a USB
flash drive inserted into the front panel USB port. (This
feature must be first enabled in the Settings > System >
General menu.)
All additional buttons are unused at this time.
CP3 and CP4 Monitors
The available CP3 and CP4 monitors integrate an external
monitor and the functionality of a remote control. Buttons
on the monitor are functionally the same as the remote
control buttons described above.
CP3 and CP4 also provide an IR receiver for the remote
control. When using the remote control, ensure it is pointed
at either the IR receiver on the monitor or the IR receiver on
the front of the DVR.
CP4
Additionally, the CP4 monitor provides two additional
buttons on the left side of the control panel. The blank
black button toggles between dim and bright monitor
brightnesses for day or night. The red PB button provides
Panic Button functionality.
9