Safety Vision OBSERVER 4100 User Manual page 27

OBSERVER 4100 USER GUIDE
25
Camera Settings
The Camera Setting menu controls
which cameras are recorded and
displayed in the live view.
Select the following for each camera:
ENABLE: Select ON to enable recording
of this camera.
NAME: Enter an optional alphanumeric
name for each specific camera.
AUDIO: Select ON to enable audio
recording for this camera.
LIVE: Select ON to display this camera in
the live view.
SEQUENCE: Select ON to display the
cameras in a loop (the cameras display in
succession in full screen mode).
SEQUENCE INT.: Enter the amount of
time (between 5 and 300 seconds) to
display each camera before advancing to
the next one.