Safety Vision OBSERVER 4100 User Manual page 29

Sub-Streaming
The Sub-Streaming menu is similar to the
Record Setting menu, except it controls the
quality of video when networked with a central
management system (CMS).
MODE SET: Select MODE1 or MODE2 and
then select SURE. MODE1 refers to LAN or
WiFi networks. MODE2 refers to other wireless
networks.
Select the following for each channel:
ENABLE: Select ON to enable this camera for sub-
streaming. Select OFF to disable it.
RES: Select the resolution for this camera when
sub-streaming. Select from CIF or QCIF.
FR: Select the frame rate in seconds of this
camera when sub-streaming. Select from 1 to 30
FPS.
QUALITY (MODE1 only): Select the quality of
recording when substreaming, with 1 being the
best and 8 being the lowest.
Kbps (MODE1 only): Select a bit-rate (in Kbps)
consistent with your agency's wireless hardware.
SUB-STREAM MODE (MODE2 only): Select
ADAPT or FIX. Selecting ADAPT allows the
Observer 4100 to automatically select the optimal
bit-rate; selecting FIX sets the bit-rate to the entry
in the BIT field.
OBSERVER 4100 USER GUIDE
Adjust these settings to achieve the
optimal data transfer rate to image
quality ratio.
27