Safety Vision OBSERVER 4100 User Manual page 30

28
Scheduled recording times starting
before midnight (23:59:59 and before)
that end the next day (00:00:00 and
afterwards) continue recording without
interruption.
OBSERVER 4100 USER GUIDE
Schedule
The Schedule menu allows to the Observer 4100
to begin and end recording automatically based
on a timed schedule.
In the DATE column to select from EVERY
(every day), WEEKDAY (Monday thru Friday)
or individual days. Asterisks (******) disable
automatic recording during the selected times on
that line.
SCHEDULE 1 and SCHEDULE 2 allow two
different recording times during the same day,
for example, if the vehicle operates during two
different shifts.
Enter automatic recording times using the
number keys on the remote control in the
HH:MM:SS-HH:MM:SS format, where the first time
is when recording will begin and the second time
is when recording will stop. All times are in the 24-
hour format.
For each scheduled time, select CON (for
continuous recording) or ALARM (for event-based
recording) in the TYPE field.
Select the duration of your agency-specific work
week in the WORKDAY FROM fields. This indicates
the days scheduled recordings occur when set to
WEEKDAY.
Cameo
The Cameo menu controls the cameo feature. The
cameo feature allows one camera channel to record
only during an event. During normal continuous
recording, the cameo camera is turned off while
the three other camera channels record as normal.
When an event is triggered, the cameo camera
turns on automatically and all four cameras record.
The cameo camera turns off again after the post-
event. This feature is useful when dealing with
privacy concerns.
Select ON in the ENABLE column to designate a
camera as the cameo camera. Only one camera
channel can use the cameo feature at one time.