Safety Vision OBSERVER 4100 User Manual page 43

OBSERVER 4100 USER GUIDE
41
Temperature
The Temperature menu controls the thresholds of
a temperature event. A 3 Axis Accelerometer (SV-
4CSDIS) is required to trigger temperature events.
Use the remote control to configure the following
options:
TEMERATURE UNIT: Select F for Fahrenheit.
Select C for Celsius.
ENAB: Select ON to enable this alarm.
THRESHOLD: Use the number keys on the remote
control to enter the maximum or minimum
temerature at which an event is triggered.
ALARM: Select ON to enable the ALM LED on the
front of the Observer 4100 when the THRESHOLD
temperature is reached and an event is triggered.
This LED continues to flash after an event is
triggered until the configuration menus are
accessed.
LOCK: Select ON to lock the video of the event
recorded when the THRESHOLD force is reached
(not allowing it to be overwritten).