Hard Drive Removal; Sd Card Removal/Insertion - Safety Vision OBSERVER 4120 Hardware User's Manual

Hard Drive Removal

To remove the hard drive from the HVR:
1.
Ensure the HVR is powered off.
2.
Insert the key into the faceplate
lock and turn it clockwise.
3.
Open the faceplate latch on the
right side of the HVR.
4.
Pull the hard drive firmly and
straight out.

SD Card Removal/Insertion

The SD card can only be accessed when
the faceplate is open.
Do not force the SD card into the slot
upside down or backwards.
Ensure the SD card's write protection
slider is in the "unlocked" position.
1.
Open the SD card slot door from
the left edge.
2.
Insert an SD card into the SD card
slot label-side up, with the notch to
the right, until it clicks in place.
To remove the SD card, press the SD
card as far as it will go in the slot, then
allow it to "spring" out.
3.
Close the SD card slot door.
To reinsert a hard drive:
1.
Push the hard drive firmly all the
way into the DVR.
2.
Secure the faceplate latch.
3.
Insert the key into the hard drive
lock and turn it counter-clockwise.
OBSERVER 4120 HARDWARE USER GUIDE 5