Appendix B: Specifications - Safety Vision OBSERVER 4100 User Manual

Appendix B: Specifications

SPECIFICATIONS
OS
Configuration IR remote (included); web browser via Ethernet port
Video Standard
Audio/Video Inputs
Audio/Video Output 1 channel, RCA in front of unit, BNC on AV cable harness
Audio/Video Compression
D1 (704 x 480); Half D1 (704 x 240); CIF (352 x 240)
Resolution*
Frame Rate*
Image Quality*
Recording
Bump on Alarm Recording* Supported on all channels (resolution, frame rate & image quality)
Pre-Event Recording
Post-Event Recording
Substreaming 2 Configurable Modes for reduced bandwidth streaming applications
Ethernet
Wi-Fi
GPS Synchronized location, speed and time with AV recordings
Storage
USB USB 2.0 on front panel for video downloads & firmware upgrades
RS-232
RS-485
Sensor Inputs
Auxiliary Outputs 4 Aux Outputs; configurable activation by any sensor
Power Input
Power Output
~12W depending on cameras and accessories connected
Power Consumption
7.48 in. x 2.2 in. x 8.5 in. (190mm x 56mm x 215.6mm)
Dimensions
Weight
Operating Temperature
Relative Humidity
*configurable per channel and event
OBSERVER 4100 USER GUIDE
Embedded Real Time Linux
NTSC / PAL selectable
4 channels
H.264
D1 - 60fps global; HD1 and CIF - 120fps global
8 levels (1 is best)
Continuous, scheduled, event only
Configurable up to 5 minutes
Configurable up to 30 minutes
10/100 RJ-45 port
802.11 b/g, WPA
1 × Class 10 32 GB SD card; standard
(up to 128 GB max; optional)
2 ports, screw terminal
2 ports, screw terminal
8 Sensor inputs + ignition
8 - 32V DC with built-in power conditioner
4 camera power outputs + 12V at 2A, 5V at 2A
2.8 lbs. (1.27 kg.)
-4°F ~ 131°F (-20°C ~ 55°C)
10% - 90%