Download Print this page

Safety Vision OBSERVER 4120 Hardware User's Manual

Hide thumbs Also See for OBSERVER 4120:

Advertisement

Quick Links

OBSERVER™ 4120
HARDWARE USER GUIDE

Advertisement

loading

Summary of Contents for Safety Vision OBSERVER 4120

  • Page 1 OBSERVER™ 4120 HARDWARE USER GUIDE...
  • Page 2 Safety Vision. Safety Vision® is a registered trademark of Safety Vision, LLC. All other products or name brands mentioned in this document are trademarks of their respective owners. For more information about Safety Vision and its products, go to www.
  • Page 3: Table Of Contents

    OBSERVER 4120 HARDWARE USER GUIDE Table of Contents Main Wiring Diagram Installation Hard Drive Removal SD Card Removal/Insertion Components Appendix A: Specifications Appendix B: Dimensions Appendix C: Bit Rate Chart...
  • Page 4: Main Wiring Diagram

    OBSERVER 4120 HARDWARE USER GUIDE Main Wiring Diagram Wiring Harness Connections Recommended Sensor Connections (12V) Sensor 8 Stop Arm Lights (school bus) Sensor 7 Amber Warning Lights (school bus) Sensor 6 Door (or wheel chair lift) Sensor 5 Head Lights...
  • Page 5 OBSERVER 4120 HARDWARE USER GUIDE [this page intentionally left blank]...
  • Page 6 OBSERVER 4120 HARDWARE USER GUIDE Installation The Observer 4120 is shipped with a base containing an integrated cooling fan. Ensure the cooling fan power cable is connected to the cooling fan power port. Remove the Security Cover and open the faceplate as described on the following page.
  • Page 7: Hard Drive Removal

    OBSERVER 4120 HARDWARE USER GUIDE Hard Drive Removal To remove the hard drive from the HVR: Ensure the HVR is powered off. Insert the key into the faceplate lock and turn it clockwise. Open the faceplate latch on the right side of the HVR.
  • Page 8: Components

    OBSERVER 4120 HARDWARE USER GUIDE Components 1 - Removable Hard Drive - The hard disk drive (HDD) provides the main storage for recorded data. 2 - Status LEDs - The Status LEDs illuminate to display the current status of the HVR. See chart at right.
  • Page 9 OBSERVER 4120 HARDWARE USER GUIDE 1 - Power Port - Connection for the UPS and main power harness. 2 - Serial Port - Connection for the I/O hub and ALM extender harness. 3 - Panel Port - Connection for the SV-CP4-HYB monitor.
  • Page 10: Appendix A: Specifications

    OBSERVER 4120 HARDWARE USER GUIDE Appendix A: Specifications SPECIFICATIONS Part No. 4120-HYB Embedded Real Time Linux Operating System NTSC / PAL (selectable) Video Standard Audio/Video Inputs Audio: 20 channels (SV threaded connector) Video: 16 channels + 4 IP channels (SV threaded connector)
  • Page 11: Appendix B: Dimensions

    OBSERVER 4120 HARDWARE USER GUIDE Appendix B: Dimensions...
  • Page 12: Appendix C: Bit Rate Chart

    OBSERVER 4120 HARDWARE USER GUIDE Appendix C: Bit Rate Chart QUALITY (kB/s) RESOLUTION Stream (kB/s) 2048 × 1.3 1536 × 1.3 1280 × 1.3 1024 × 1.3 900 × 1.3 800 × 1.3 720 × 1.3 640 × 1.3 PAL: 960 × 576 MB/hour/ch.
  • Page 13 OBSERVER 4120 HARDWARE USER GUIDE FCC Compliance Statement NOTE This device has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 14 CORPORATE HEADQUARTERS 6100 W. Sam Houston Pkwy. N. Houston, TX 77041-5113 Main: 713.896.6600 Toll Free: 800.880.8855 Fax: 713.896.6640 www.safetyvision.com...