Avaya Scopia XT7100 Deployment Manual page 119

Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. To assign a preferred network port, access the network priority settings. From the XT Series
web interface, select Administrator Settings > Networks > Preferences > General. From
the endpoint's main menu, select Configure > Advanced > Networks > Preferences >
General.
2. Set the Priority setting to the GLAN port that the preferred network uses. When the routing
of a call cannot be determined by matching the destination address with the GLAN address,
it uses the preferred network port.
3. From the web interface only, select Save.
4. To define the MTU size and network speed for each port, access the advanced network
settings. From the XT Series web interface, select Administrator Settings > Networks >
GLAN1/GLAN2 > Parameters. From the endpoint's main menu, select Configure >
Advanced > Networks > GLAN1/GLAN2 > Parameters.
Figure 83: Configuring advanced network connection from the web interface
April 2015
on page 112.
Figure 82: Choosing the priority network port
Avaya Scopia
Comments? infodev@avaya.com
Configuring Advanced Network Settings
®
XT Series Deployment Guide
119