Avaya Scopia XT7100 Deployment Manual page 168

Securing your XT Series
Before you begin
Upload the required certificates to the XT Series, as described in
Certificate Signing Request for XT Series
Procedure
1. From the XT Series web interface, select Administrator Settings > Protocols > SIP. From
the endpoint's main menu, select Configure > Advanced > Protocols > SIP > Advanced.
2. Define the following settings:
Table 51: Configuring TLS Settings
Field
Transport Outbound Call
Use TLS
Verify Certificate
3. Select Save.
®
Avaya Scopia XT Series Deployment Guide
168
on page 162.
Figure 122: Enabling TLS
Description
Select TLS to secure outgoing calls via TLS.
Select Yes to enable TLS functionality.
Select Yes to connect to other devices via TLS
only when the other device has certificates
signed by the same Certificate Authority (CA) as
the XT Series.
No to connect to a device whose certificate has
not been validated.
Comments? infodev@avaya.com
Generating and Uploading a
April 2015