Avaya Scopia XT7100 Deployment Manual page 128

Advanced Configuration of the XT Series
Bandwidth H.264 High Profile
Sharpness
1.3Mbps
1.4Mbps
1080p30
1.5Mbps
1.7Mbps
1.9Mbps
1080p60
2.5Mbps
When using the built-in MCU to host videoconferences, the total maximum bandwidth of 12Mbps is
shared amongst the participants. Normally each person is allocated 2Mbps, but when a meeting has
eight participants, each is allocated 1.7Mbps.
You can also determine whether to use more or less bandwidth for participant video versus shared
content like a presentation, and you can even define the bandwidth limits for each network port on
your XT Series.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the call settings. From the XT Series web interface, select Administrator Settings >
Calls > Preferences > General. From the endpoint's main menu, select Configure >
Advanced > Calls > Preferences > General.
®
Avaya Scopia XT Series Deployment Guide
128
H.264 High Profile
Motion
1080p60
on page 112.
Comments? infodev@avaya.com
H.264 Baseline H.264 Baseline
Sharpness Motion
720p60
720p60
1080p30
1080p60 1080p60
April 2015