Avaya Scopia XT7100 Deployment Manual page 82

Initial Configuration of the XT Series
Before you begin
Verify that you have the following:
• Access to the
If you do not have access, navigate to
page. If you do not have login information for
Representative.
• The endpoint's host ID (MAC address of the GLAN 1 port), located in your customer letter. You
can also find this information from one of the endpoint's interfaces. For example, when you
start the Avaya Scopia
Enable Software Version screen to view the host ID. Alternatively, you can click Start Demo
Version to run the software without a license for 30 days. On the demo version, you can
navigate to Configure > About. For more information on this method, see
Information for Customer Support
web interface when you log on to http://<XT Series IP address> with the username
Admin and the password 1234. When you log on, click Licenses. You can also use the
Licenses page to enable your license once you receive it from PLDS.
• A License Activation Code (LAC) to activate the product itself and any optional features you
purchased. You can find the LAC in the customer letter shipped with the product, or the email
you received when you purchased the product or optional license.
Procedure
1. Obtain the product's license keys from the Avaya Product Licensing and Delivery System, as
follows:
a. Access the
b. Using your license activation code (LAC) and your endpoint's host ID, obtain the license
key as described in Getting Started with Avaya PLDS.
The LAC generates a license key to activate the product, as well as any optional
licenses you ordered when purchasing the product. If you purchased optional licenses
separately, perform this step for each license you purchased, using its unique LAC.
Note:
If the LAC is not recognized by the Avaya Product Licensing and Delivery System,
use the following alternative method:
From the Avaya Product Licensing and Delivery System Home page, navigate to
Asset > View Entitlements > Search Entitlements. Search for your LAC by
entering it in the %LAC field. From the Options menu, click Activate. During the
Activation Wizard, you must manually create a new MAC address (Host ID).
c. Write down the license keys, required to activate the endpoint and its optional features.
2. Activate the license and/or optional features on your XT Series:
a. From the XT Series web interface, select Enable License on the home page. From the
endpoint's main menu, select Configure > Advanced > Utilities > Licenses.
®
Avaya Scopia XT Series Deployment Guide
82
Avaya Product Licensing and Delivery
®
XT Series without a license, you can click Activate License on the
on page 172. The host ID is also displayed on the XT Series
Avaya Product Licensing and Delivery
Comments? infodev@avaya.com
System.
Avaya's login page and follow the instructions on the
Avaya's login page, contact your Avaya Support
System.
Viewing System
April 2015