Avaya Scopia XT7100 Deployment Manual page 134

Advanced Configuration of the XT Series
Figure 93: Merging audio into two tracks and routing them to audio outputs
The web interface displays an interactive diagram of audio inputs to the left and outputs to
the right. Each entry is detailed in
Table 38: Configuring audio output settings
Field Name
Inputs > Digital Audio
Inputs > Echo Cancelled inputs
Inputs > Rx Remote
Inputs > Analog Audio
Inputs > HD
Outputs > HD1/HD2
Outputs > Digital Audio
®
Avaya Scopia XT Series Deployment Guide
134
Table 38: Configuring audio output settings
Description
Refers to digital microphones (or other digital audio device)
connected to the
Refers to all the microphones deployed in the room for
capturing voices. To avoid echo or feedback loops, you
cannot route room microphones to track 1, which is the
default track for the main monitor's speakers (HD1).
Refers to the remote sound received from other endpoints
participating in a meeting.
Refers to an analog microphone (or other analog audio
device) connected to the
Refers to sound coming from an HDMI device.
Refers to a monitor or other HDMI device connected to the
HD1 or HD2
Refers to a digital audio output device like an external
speaker connected to the
connector.
Comments? infodev@avaya.com
on page 134.
port via its mini-TOSlink connector.
port via its 3.5mm jack.
port.
port via its mini-TOSlink
Table continues...
April 2015