Avaya Scopia XT7100 Deployment Manual page 39

Port Protocol Source
Range
Software
Upgrade
application
60123 Telnet Telnet client
(TCP)
Important:
Since source and destination are not fixed on bidirectional ports, we refer to them here as
Connection Points. Each connection point can be both the source and the destination.
Table 7: Bidirectional ports to open for the XT Series
Port Protocol
Range
1720 H.225.0 /Q.
931
3230- H.225.0 /
3250 Q931, H.245,
SIP (TCP)
3230- RTP, RTCP
3313 (UDP)
April 2015
Destination
XT Series
Connection Functionality
Points
XT Series, Any Enables H.323 call
H.323 endpoint signaling (Q.931) for
the XT Series.
XT Series, Any Enables H.323 call
SIP or H.323 control signaling (Q.
endpoint 931), media control
signaling (H.245), SIP
(TCP) call signaling,
and BFCP signaling.
These are dynamic
TCP ports which the
XT Series uses to
connect simultaneous
H.323 and SIP calls.
XT Series, Any Enables H.323 and
SIP or H.323 SIP media (audio,
endpoint video, H.224/data
RTP) and media
control (RTCP).
Comments? infodev@avaya.com
Implementing Port Security for the Avaya Scopia
Functionality Result of
Blocking Port
XT Series using Scopia
software. Management or a
standalone XT
Series software
upgrade
application.
Enables you to Telnet cannot
remotely manage access the XT
the XT Series Series CLI
using the CLI application, and
application via cannot remotely
Telnet. manage it.
Result of Blocking
Port
The XT Series cannot
connect H.323 calls.
The XT Series cannot
connect SIP or H.323
calls.
No media can be
exchanged in H.323 or
SIP calls.
®
Avaya Scopia
®
Required
®
Series software
remotely.
Optional
Required
Mandatory
Mandatory to
support H.323
calls, and to
support SIP calls
on TCP.
To configure,
see Configuring
the TCP or UDP
Port Range on
the Avaya
®
Scopia
Series on
page 40.
Mandatory to
support H.323
and SIP calls.
To configure,
see Configuring
the TCP or UDP
Table continues...
XT Series Deployment Guide
XT Series
XT
39