Avaya Scopia XT7100 Deployment Manual page 110

Initial Configuration of the XT Series
Parameter
Server 1 DNS Name
Server 2 DNS Name (Optional)
Server 3 DNS Name (Optional)
Server Model
3. Configure advanced SIP options as described in
parameters
settings. On the web interface, they appear directly below the SIP server settings described
above.
Table 25: Configuring SIP-related parameters
Parameter
Transport Outbound Call
UDP/TCP Listening Port
Transport Outbound BFCP
®
Avaya Scopia XT Series Deployment Guide
110
on page 109. From the endpoint's main menu, select Advanced to access these
Figure 76: Configuring advanced SIP settings
Comments? infodev@avaya.com
Description
Enter the DNS name or IP address of each SIP server,
used to register the endpoint.
Select the model of the SIP server for the best
interaction. If you are not sure or it is not listed, select
Auto.
Table 24: Configuring SIP-related
Description
Select the preferred transport protocol for outbound SIP
calls: TCP or UDP.
Enter the port number used by XT Series for receiving
inbound SIP calls. By default, the system uses port 5060.
Select the transport protocol to use when sharing content
via BFCP, from the options listed below. BFCP is a
protocol which coordinates shared videoconference
features in SIP calls, often used by one participant at a
time. For example, when sharing content to others in the
meeting, one participant is designated as the presenter,
and is granted the floor for presenting. All endpoints must
Table continues...
April 2015