Table of Contents
Advertisement
Physical Details
Front-mounted LEDs
Power
On - Power on.
Off - No power.
Status (Red)
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up.
WAN
On - If using the WAN port, connection to the Broadband modem is
established. If using the built-in ISDN TA, connection to ISP is estab-
lished.
Off - No active connection via the WAN or ISDN ports.
Flashing - Data is being transmitted or received via the WAN or ISDN
port.
ISDN
On - ISDN "B Channel" (data channel) connection is established.
Off - No ISDN "B Channel" (data channel) connection.
Flashing - Data is being transmitted or received via the built-in ISDN TA.
LAN: 10
On - LAN connection is using 10BaseT.
Off - No 10BaseT LAN connection.
Flashing - Data is being transmitted or received via the LAN port.
LAN: 100
On - LAN connection is using 100BaseT.
Off - No 100BaseT LAN connection.
Flashing - Data is being transmitted or received via the LAN port.
Wireless
On - Wireless connection available; Wireless Access Point is ready for
use.
Off - No Wireless connection available.
Flashing - Data is transmitted or received via the Wireless access point.
This includes "network traffic" as well as user data.
COM
Off - Idle or no active device connected to the serial (RS232) port.
(Serial Port)
Flashing - Data is transmitted or received via the serial (RS232) port.
Print Error
On - Printer error detected.
Off - No printer error detected.
Print ACT
On - Connection to printer established.
Off - No connection to printer; printer is Off or Off-line.
Flashing - Data is being transmitted to the printer.
Introduction
5
Advertisement
Table of Contents
