Physical Details - LevelOne WBR-1100TX User Manual

Physical Details

LEDs - WBR-1100TX
Power
Diag
WAN Act
LAN: 10
LAN: 100
Wlan Act
Print Err
Print Act
LEDs - WBR-1400TX
Power
Status (Red)
LAN
(1, 2, 3, 4)
On - Power on.
Off - No power.
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up.
On - WAN connection is established.
Flashing - Data is being transmitted or received via the WAN port.
On - LAN connection is using 10BaseT.
Off - No 10BaseT LAN connection.
Flashing - Data is being transmitted or received via the LAN port.
On - LAN connection is using 100BaseT.
Off - No 100BaseT LAN connection.
Flashing - Data is being transmitted or received via the LAN port.
On - Wireless connection available; Wireless Access Point is ready for
use.
Off - No Wireless connection available.
Flashing - Data is transmitted or received via the Wireless access point.
This includes "network traffic" as well as user data.
On - Printer error detected.
Off - No printer error detected.
On - Connection to printer established.
Off - No connection to printer; printer is Off or Off-line.
Flashing - Data is being transmitted to the printer.
On - Power on.
Off - No power.
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up.
For each port, there are 2 LEDs
•
Link/Act
Introduction
5