Virtual Servers - LevelOne WBR-1101TX User Manual

LevelOne WBR-1101TX User Guide

Virtual Servers

This feature allows you to make Servers on your LAN accessible to Internet users. Normally,
Internet users would not be able to access a server on your LAN because:
•
Your Server does not have a valid external IP Address.
•
Attempts to connect to devices on your LAN are blocked by the firewall in this device.
The "Virtual Server" feature solves these problems and allows Internet users to connect to your
servers, as illustrated below.
Web Server
(192.168.0.10)
Remote PC
Using Web Server
(http://203.70.212.52)
IP Address seen by Internet Users
Note that, in this illustration, both Internet users are connecting to the same IP Address, but
using different protocols.
To Internet users, all virtual Servers on your LAN have the same IP Address.
This IP Address is allocated by your ISP.
This address should be static, rather than dynamic, to make it easier for Internet users to
connect to your Servers. If using a Static IP Address, it is entered on the "WAN" screen.
Types of Virtual Servers
The LevelOne WBR-1101TX supports two (2) types of Virtual Servers:
•
Pre-defined - Standard server types. The only data required is the IP Address of the server
on your LAN.
•
User-defined - Non-standard servers. You must provide additional information about the
server.
Note: The TOTAL number of Virtual Servers which can be used at any time is 10.
192.168.0.1
(LAN IP Address)
Wireless
Router
203.70.212.52
(Internet IP Address)
Internet
Figure 46: Virtual Servers
FTP Server
(192.168.0.20)
Remote PC
Using FTP Server
(ftp://203.70.212.52)
86