LevelOne WBR-3408 User Manual
  1. Manuals
  2. Brands
  3. LevelOne Manuals
  4. Wireless Router
  5. NetCon WBR-3408
  6. User manual

LevelOne WBR-3408 User Manual

11g wireless broadband router
Hide thumbs Also See for WBR-3408:
Table of Contents

Advertisement

Quick Links

LevelOne
WBR-3408

User Manual

11g Wireless Broadband Router
(Roteador banda-larga sem fio- Wireless G)
Ver. 3.000
Downloaded from
www.Manualslib.com
manuals search engine

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WBR-3408 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for LevelOne WBR-3408

Summary of Contents for LevelOne WBR-3408

  • Page 1: User Manual

    LevelOne WBR-3408 User Manual 11g Wireless Broadband Router (Roteador banda-larga sem fio- Wireless G) Ver. 3.000 Downloaded from www.Manualslib.com manuals search engine...
  • Page 2 Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. CE Marking Warning Hereby, Digital Data Communications, declares that this (Model-no. WBR-3408) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

  • Page 3: General Public License

    General Public License This product incorporates open source code into the software and therefore falls under the guidelines governed by the General Public License (GPL) agreement. Adhering to the GPL requirements, the open source code and open source license for the source code are available for free download at http://global.level1.com. If you would like a copy of the GPL or other open source code in this software on a physical CD medium, LevelOne (Digital Data Communications) offers to mail this CD to you upon request, for a price of US$9.99 plus the cost of shipping.

  • Page 4: Table Of Contents

    Table of Contents CHAPTER 1 INTRODUCTION ..................6 Wireless Router Features .................... 6 Package Contents ...................... 10 Physical Details ......................11 CHAPTER 2 INSTALLATION ..................13 Requirements ......................13 Procedure ........................13 CHAPTER 3 SETUP ......................15 Overview ........................15 Configuration Program .....................
  • Page 5 PC Database ....................... 87 Config File ........................90 Logs ..........................91 E-Mail ......................... 93 Diagnostics ......................... 95 Remote Administration ..................... 96 Routing ........................98 Upgrade Firmware ....................102 CHAPTER 8 ACCESS POINT MODE ................. 103 Overview ........................103 Management Connections ..................103 Mode Screen ......................

  • Page 6: Chapter 1 Introduction

    Chapter 1 Introduction This Chapter provides an overview of the Wireless Router's features and capabilities. Congratulations on the purchase of your new Wireless Router. The Wireless Rou- ter is a multi-function device providing the following services:  Shared Broadband Internet Access for all LAN users.
  • Page 7 Introduction Advanced Internet Functions  Application Level Gateways (ALGs). Applications which use non- standard connections or port numbers are normally blocked by the Firewall. The ability to define and allow such applications is provided, to enable such ap- plications to be used normally. ...
  • Page 8 Introduction  Simple Configuration. If the default settings are unsuitable, they can be changed quickly and easily.  WPS Support. WPS (Wi-Fi Protected Setup) can simplify the process of connecting any device to the wireless network by using the push button confi- guration (PBC) on the Wireless Access Point, or entering a PIN code if there's no button.
  • Page 9 Introduction Security Features  Password - protected Configuration . Password protection is provided to prevent unauthorized users from modifying the configuration data and settings.  Wireless LAN Security . WPA-PSK, WEP and Wireless access control by MAC address are all supported. The MAC-level access control feature can be used to prevent unknown wireless stations from accessing your LAN.

  • Page 10: Package Contents

    Introduction Package Contents The following items should be included. If any of these items are damaged or missing, please contact your dealer immediately.  WBR-3408 11g Wireless Broadband Router  1 Cat-5 Ethernet (LAN) cable  Power Adapter  Quick Installation Guide ...

  • Page 11: Physical Details

    Introduction Physical Details Front Panel Front Panel Push the WPS button on the WBR-3408, and also on your other wireless device to perform WPS syncing to create a Button secured wireless connection automatically. Wireless On - Wireless security is On.
  • Page 12 Introduction Wireless Push button for 3 seconds to Enable or Disable the wireless signal. On / Off Button Reboot Reboot - Press WPS and Wireless On/Off buttons together or Reset for 5 seconds. The router will restart and boot again. Reset –...

  • Page 13: Chapter 2 Installation

    Chapter 2 Installation This Chapter covers the physical installation of the Wireless Router. Requirements  Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.  TCP/IP protocol must be installed on all PCs.  For Internet Access, an Internet Access account with an ISP, and a DSL con- nection.
  • Page 14 Installation 1. Choose an Installation Site Select a suitable place on the network to install the Wireless Router. For best Wireless reception and performance, the Wireless Router should be positioned in a central location with mini- mum obstructions between the Wireless Router and the PCs. Also, if using multiple Access Points, adjacent Access Points should use different Channels.

  • Page 15: Chapter 3 Setup

    Chapter 3 Setup This Chapter provides Setup details of the Wireless Router. Overview This chapter describes the setup procedure for:  Internet Access  LAN configuration  Wireless setup  Assigning a Password to protect the configuration data. PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Configuration.
  • Page 16 Setup Use any of the following Administration Configuration Chapter 7: settings or features: Advanced Administration  PC Database  Config File  Logs  E-Mail  Diagnostics  Remote Administration  Routing  Upgrade Firmware Downloaded from www.Manualslib.com manuals search engine...

  • Page 17: Configuration Program

    Setup Configuration Program The Wireless Router contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your Browser must support Java- Script.  Internet Explorer 6 and above is recommended. Preparation Before attempting to configure the Wireless Router, please ensure that: ...

  • Page 18: Setup Wizard

    Setup If you can't connect If the Wireless Router does not respond, check the following:  The Wireless Router is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" com- mand: ...
  • Page 19 Setup Common Connection Types DSL Modems Type Details ISP Data required Dynamic Your IP Address is allo- None. IP Address cated automatically, when you connect to you ISP. Static (Fixed) Your ISP allocates a per- IP Address allocated to you. IP Address manent IP Address to you.

  • Page 20: Home Screen

    Setup Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below. Home Screen Main Menu The main menu, on the left, contains links to the most-commonly used screen. To see the links to the other available screens, click "Advanced"...

  • Page 21: Lan Screen

    Setup LAN Screen Use the LAN link on the main menu to reach the LAN screen. An example screen is shown below. LAN Screen Data - LAN Screen TCP/IP IP address for the Wireless Router, as seen from the local LAN. IP Address Use the default value unless the address is already in use or your LAN is using a different IP address range.
  • Page 22 Setup DHCP What DHCP Does A DHCP (Dynamic Host Configuration Protocol) Server allocates a valid IP address to a DHCP Client (PC or device) upon request.  The client request is made when the client device starts up (boots).  The DHCP Server provides the Gateway and DNS addresses to the client, as well as allocating an IP Address.

  • Page 23: Mode Screen

    Setup Mode Screen Use this screen to change the mode between Router mode and Access Point mode. Mode Screen Select the desired option, and click "Save". Router In this mode, this device can provide shared Internet Access to all your LAN users. Also, by default, it acts a DHCP Server, providing an IP address and related information to all Wireless and LAN users.

  • Page 24: Wireless - Options Screen

    Setup Wireless - Options Screen The Wireless Router's settings must match the other Wireless stations. Note that the Wireless Router will automatically accept both 802.11b and 802.11g connections, and no configuration is required for this feature. To change the Wireless Router's default settings for the Wireless Access Point feature, use the Wireless - Options link on the main menu to reach the Wireless - Options screen.
  • Page 25 Setup SSID 1/2 This is also called the "Network Name".  If using an ESS (Extended Service Set, with multiple access points) this ID is called an ESSID (Extended Service Set Identifier).  To communicate, all Wireless stations should use the same SSID/ESSID.

  • Page 26: Wireless - Schedule

    Setup Wireless - Schedule To conserve power usage, you can set the time when the wireless signal will be deactivated. For example at night when there is no one using the wireless network. Wireless – Schedule Screens Wireless Schedule This button Enables or Disables the Wireless Schedule function. Enable / Disa- Set Schedule Click this button to set the times that the Wireless signal will turn...

  • Page 27: Wireless - Mac Filter

    Setup Wireless - MAC Filter This function allows you to allow or deny access to Wireless stations using their MAC Addresses. Wireless – MAC Filter Screen MAC Address Filter Allow access Use this feature to determine which Wireless stations can use by …...

  • Page 28: Wireless - Mac Filter - Trusted Wireless Stations

    Setup Wireless - MAC Filter - Trusted Wireless Stations This feature can be used to prevent unknown Wireless stations from using the Access Point. This list has no effect unless the setting Allow access by trusted stations only is enabled. Trusted Wireless Stations Data - Trusted Wireless Stations Trusted Wireless...
  • Page 29 Setup Edit Use this to change an existing entry in the "Trusted Stations" list: 1. Select the Station in the Trusted Station list. 2. Click the Edit button. The address will be copied to the "Address" field, and the Add button will change to Update. 3.

  • Page 30: Wireless - Wifi Protected Setup (Wps)

    Setup Wireless - WiFi Protected Setup (WPS) WPS feature is following the Wi-Fi Alliance WPS standard and it eases the set up of security-enabled Wi-Fi networks in the home and small office environment. It reduces the user steps required to configure a network and supports two me- thods that are familiar to most consumers to configure a network and enable security.
  • Page 31 Setup An alternative is to press the WPS button at the front of the router until the WLAN light starts flashing. This indicates that WPS is activated and ready to be paired with client device. The WPS will be in pairing mode (flashing) for 1 minute. Then press and hold the WPS button on your wireless client for 1 second.

  • Page 32: Wireless - Wireless Distribution System (Wds)

    For maximum compatibility, it is recommended that WDS be set up using only the same models, in this case, WBR-3408. Also note that the standard only supports WEP encryption. Wireless Distribution System Screen...
  • Page 33 Setup WDS Environment Below is an example of how a WDS operates. Wireless Distribution System 1. AP1, AP2 and AP3 are configured to use the same Channel and Security settings. 2. Enter AP2 and AP3’s MAC addresses into AP1’s WDS MAC Address list. 3.

  • Page 34: Wireless Security

    Setup Wireless Security This screen is accessed by clicking the "Configure" button on the Wireless - Op- tions screen. There are 4 options for Wireless security: Wireless Security Screen  Disabled - no data encryption is used.  WEP - data is encrypted using the WEP standard. ...
  • Page 35 Setup WEP Wireless Security Data - WEP Screen WEP Data Encryption Authentication Normally, this should be left at the default value of "Automatic". If changed to "Open System" or "Shared Key", ensure that your Type Wireless Stations use the same setting. Select the desired option, and ensure the Wireless Stations use WEP Data the same setting.
  • Page 36 Setup WPA-PSK Wireless Security WPA-PSK Data - WPA-PSK Screen Security WPA-PSK System Like WEP, data is encrypted before transmission. WPA is more secure than WEP, and should be used if possible. WPA-PSK is the version of WPA, which does NOT require a Radius Server on your LAN.
  • Page 37 Setup WPA2-PSK Wireless Security WPA2-PSK Data - WPA2-PSK Screen Authentication WPA2-PSK This is a further development of WPA-PSK, and offers even greater security. Enter the PSK (network key). Data is encrypted using a key derived from the network key. Other Wireless Stations must use the same network key.
  • Page 38 Setup WPA / WPA2-802.1x Wireless Security WPA / WPA2-802.1x Data – WPA / WPA2-802.1x Screen Server Address Enter the server address here. Radius Port Enter the port number used for connections to the Radius Server. Shared Key Enter the shared key. Data is encrypted using a key derived from the network key.

  • Page 39: Password Screen

    Setup Password Screen The password screen allows you to assign a password to the Wireless Router. Password Screen Enter the existing password in this field. Old Password New password Enter the new password here. Re-enter the new password here. Verify password You will be prompted for the password when you connect, as shown below.

  • Page 40: Chapter 4 Pc Configuration

    Chapter 4 PC Configuration This Chapter details the PC Configuration required on the local ("Inter- nal") LAN. Overview For each PC, the following may need to be configured:  TCP/IP network settings  Internet Access configuration  Wireless configuration Windows Clients This section describes how to configure Windows clients for Internet access via the Wireless Router.
  • Page 41 PC Configuration Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as shown below. Windows NT4.0 - TCP/IP 2. Click the Properties button to see a screen like the one below. Downloaded from www.Manualslib.com manuals search engine...
  • Page 42 PC Configuration Windows NT4.0 - IP Address 3. Select the network card for your LAN. 4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address, as explained below. Obtain an IP address from a DHCP Server This is the default Windows setting.
  • Page 43 PC Configuration Windows NT4.0 - Add Gateway 2. The DNS should be set to the address provided by your ISP, as follows:  Click the DNS tab.  On the DNS screen, shown below, click the Add button (under DNS Ser- vice Search Order), and enter the DNS provided by your ISP.
  • Page 44 PC Configuration Checking TCP/IP Settings - Windows 2000: 1. Select Control Panel - Network and Dial-up Connection. 2. Right - click the Local Area Connection icon and select Properties. You should see a screen like the following: Network Configuration (Win 2000) 3.
  • Page 45 PC Configuration 5. Ensure your TCP/IP settings are correct, as described below. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the Wireless Router will act as a DHCP Server.
  • Page 46 PC Configuration Checking TCP/IP Settings - Windows XP 1. Select Control Panel - Network Connection. 2. Right click the Local Area Connection and choose Properties. You should see a screen like the following: Network Configuration (Windows XP) 3. Select the TCP/IP protocol for your network card. 4.
  • Page 47 PC Configuration TCP/IP Properties (Windows XP) 5. Ensure your TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the Wireless Router will act as a DHCP Server.
  • Page 48 PC Configuration Checking TCP/IP Settings - Windows Vista 1. Select Control Panel - Network Connections. 2. Right click the Local Area Connection Status and choose Properties. Click Continue to the User Account Control dialog box, then you should see a screen like the following: Network Configuration (Windows Vista) 3.
  • Page 49 PC Configuration TCP/IP Properties (Windows Vista) 5. Ensure your TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. To work correctly, you need a DHCP server on your LAN.
  • Page 50 PC Configuration Internet Access To configure your PCs to use the Wireless Router for Internet access:  Ensure that the DSL modem, Cable modem, or other permanent connection is functional.  Use the following procedure to configure your Browser to access the Internet via the LAN, rather than by a Dial-up connection.

  • Page 51: Macintosh Clients

    PC Configuration  Click the Setup button.  Select Create Location, and change the location name from "New Locality" to "Wireless Router".  Click Edit Location. Select TCP/IP for the Network field. (Leave the Phone Number blank.)  Click Save, then OK. Configuration is now complete.

  • Page 52: Linux Clients

    PC Configuration Linux Clients To access the Internet via the Wireless Router, it is only necessary to set the Wireless Router as the "Gateway". Ensure you are logged in as "root" before attempting any changes. Fixed IP Address By default, most Unix installations use a fixed IP Address. If you wish to continue using a fixed IP Address, make the following changes to your configuration.

  • Page 53: Wireless Station Configuration

    PC Configuration Wireless Station Configuration This section applies to all Wireless stations wishing to use the Wireless Router's Access Point, regardless of the operating system which is used on the client. To use the Wireless Access Point in the Wireless Router, each Wireless Station must have compatible settings, as follows: The mode must be set to Infrastructure (rather than Ad-hoc) Mode...
  • Page 54 PC Configuration Wireless Networks (Windows XP) If the "Broadcast SSID" setting on the Wireless Router has been disabled, its SSID will NOT be listed. See the following section "If the SSID is not listed" for details of dealing with this situation. 4.
  • Page 55 PC Configuration To connect:  Check the checkbox Allow me to connect to the selected wireless network, even though it is not secure.  The Connect button will then be available. Click the Connect button, and wait a few seconds for the connection to be established. If using WEP Data Encryption If WEP data encryption has been enabled on the Wireless Router, Windows will detect this, and show a screen like the following.
  • Page 56 PC Configuration Figure 34: Advanced - Wireless Networks Select the SSID for the Wireless Router, and click Configure, to see a screen like the following: Wireless Network Properties - WEP Configure this screen as follows:  Set Network Authentication to match the Wireless Router. (If the setting on the Wireless Router is "Auto", then either Open or Shared can be used.) ...
  • Page 57 PC Configuration  For the Network key and Confirm network key, enter the default key value used on the Wireless Router. (Windows will determine if 64bit or 128bit encryp- tion is used.)  The Key index must match the default key index on the Wireless Router. The default value is 1.
  • Page 58 PC Configuration If using WPA-PSK Data Encryption If WPA-PSK data encryption has been enabled on the Wireless Router, it does not matter which network is selected on the screen below. Just click the Advanced button. Wireless Networks (Windows XP) You will then see a screen like the example below. Advanced - Wireless Networks Select the SSID for the Wireless Router, and click Configure, to see a screen like the following:...
  • Page 59 PC Configuration Wireless Network Properties- WPA-PSK Configure this screen as follows:  Set Network Authentication to WPA-PSK.  For Data Encryption, select TKIP.  For the Network key and Confirm network key, enter the network key (PSK) used on the Wireless Router. ...
  • Page 60 PC Configuration Preferred Networks Click OK to establish a connection to the Wireless Router. If the SSID is not listed If the "Broadcast SSID" setting on the Wireless Router has been disabled, its SSID will NOT be listed on the screen below. Wireless Networks (Windows XP) In this situation, you need to obtain the SSID from your network administrator, then follow this procedure:...
  • Page 61 PC Configuration Unlisted Wireless Network 2. Click the Add button. You will see a screen like the example below. Add Wireless Network 3. Configure this screen as follows:  Enter the correct SSID, as used on the Wireless Router. Remember the SSID is case-sensitive, so be sure to match the case, not just the spelling.
  • Page 62 PC Configuration  If using data encryption (WEP or WPA-PSK), enter the key used on the Wireless Router. See the preceding sections for details of WEP and WPA- PSK.  Uncheck the options The key is provided for me automatically and This is a computer-to-computer (ad hoc) network.

  • Page 63: Chapter 5 Operation And Status

    Chapter 5 Operation and Status This Chapter details the operation of the Wireless Router and the status screens. For Details of operation in Bridge (Modem) mode, see Chapter 8 - Modem Mode. Operation - Router Mode Once both the Wireless Router and the PCs are configured, operation is automatic.
  • Page 64 Operation and Status Data - Status Screen Internet Connection Method Displays the current connection method, as set in the Setup Wizard. This indicates the current status of the Internet Connection Connection Status  Active - Connection exists  Idle - No current connection, but no error has been detected.
  • Page 65 Operation and Status System Device Name The current name of the Router. This name is also the "hostname" for users with an "@Home" type connection. Firmware Version The version of the current firmware installed. It displays the current time of the system. Current Time Buttons Click this button to open a sub-window and view a detailed...

  • Page 66: Connection Status - Pppoe

    Operation and Status Connection Status - PPPoE If using PPPoE (PPP over Ethernet), a screen like the following example will be displayed when the "Connection Details" button is clicked. PPPoE Status Screen Data - PPPoE Screen This indicates how long the current connection has been Connection Time established.

  • Page 67: Connection Status - Pptp

    Operation and Status Connection Status - PPTP If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following exam- ple will be displayed when the "Connection Details" button is clicked. PPTP Status Screen Data - PPTP Status Screen Connection The IP Address of this device, as seen by Internet users. This IP Address address is allocated by your ISP (Internet Service Provider).

  • Page 68: Connection Status - L2Tp

    Operation and Status Connection Status - L2TP If using L2TP, a screen like the following example will be displayed when the "Con- nection Details" button is clicked. L2TP Status Screen Data - L2TP Screen L2TP Status IP Address The IP Address of this device, as seen by Internet users. This address is allocated by your ISP (Internet Service Provider).

  • Page 69: Connection Details - Dynamic Ip Address

    Operation and Status Connection Details - Dynamic IP Address If your access method is "Direct" (no login), with a Dynamic IP address, a screen like the following example will be displayed when the "Connection Details" button is clicked. Connection Details - Fixed/Dynamic IP Address Data - Dynamic IP address Internet IP Address...

  • Page 70: Connection Details - Fixed Ip Address

    Operation and Status Connection Details - Fixed IP Address If your access method is "Direct" (no login), with a fixed IP address, a screen like the following example will be displayed when the "Connection Details" button is clicked. Connection Details - Fixed IP Address Data - Fixed IP address Screen Fixed IP Address The IP Address of this device, as seen by Internet users.

  • Page 71: Chapter 6 Advanced Features

    Chapter 6 Advanced Features This Chapter explains when and how to use the Wireless Router's "Advanced" Features. Overview The following advanced features are provided:  Internet:   URL filter  Access Control  Dynamic DNS  Options  Schedule ...
  • Page 72 Advanced Features  If the DMZ feature is enabled, you must enter IP address of the PC to be used as the "DMZ PC". The "DMZ PC" is effectively outside the Firewall, mak- ing it more vulnerable to attacks. For this reason, you should only enable the DMZ feature when required.
  • Page 73 Advanced Features Data - URL Filter Screen Current Filter Strings The list contains the current list of items to block. Current Filter Strings  To add to the list, use the "Add" option below.  To delete an entry, select it and click Delete button. ...

  • Page 74: Dynamic Dns (Domain Name Server)

    Advanced Features Dynamic DNS (Domain Name Server) This free service is very useful when combined with the Virtual Server feature. It allows Internet users to connect to your Virtual Servers using a URL, rather than an IP Address. This also solves the problem of having a dynamic IP address. With a dynamic IP address, your IP address may change whenever you connect, which makes it difficult to connect to you.
  • Page 75 Advanced Features DDNS Data Host Name Enter the domain name allocated to you by the DDNS Service. If you have more than one name, enter the name you wish to use. User Name Enter your Username for the DDNS Service. (TZO.com uses your E-mail address.) Password Enter your current password for the DDNS Service.

  • Page 76: Options

    Advanced Features Options This screen allows advanced users to enter or change a number of settings. For normal operation, there is no need to use this screen or change any settings. An example Options screen is shown below. Options Screen Data - Options Screen Internet ...

  • Page 77: Schedule

    Advanced Features Schedule This Schedule can be used for the Firewall Rules and the URL filter. Schedule Screen Data - Schedule Screen Schedule Each day of the week can be scheduled independently. Session 1 Two (2) separate sessions or periods can be defined. Session 2 can be left blank if not required.
  • Page 78 Advanced Features Use this NTP If you prefer to use a particular NTP server as the primary NTP server, check the checkbox "Use this NTP Server" and enter Server the Server's IP address in the fields provided. If this setting is not enabled, the default NTP Servers are used. Current Time This displays the current time on the Wireless Router, at the time the page is loaded.

  • Page 79: Port Trigger

    Advanced Features Port Trigger If you use Internet applications which use non-standard connections or port num- bers, you may find that they do not function correctly because they are blocked by the Wireless Router's firewall. In this case, you can define the application as a "Port Trigger".
  • Page 80 Advanced Features  Type - Select the protocol (TCP or UDP) used when you Outgoing send data to the remote system or service. Ports  Start - Enter the beginning of the range of port numbers used by the application server, for data you send to it. If the application uses a single port number, enter it in both the "Start"...

  • Page 81: Single Port Forwarding

    Advanced Features Single Port Forwarding This feature allows you to make Servers on your LAN accessible to Internet users. Normally, Internet users would not be able to access a server on your LAN because:  Your Server does not have a valid external IP Address. ...
  • Page 82 Advanced Features Data - Single Port Forwarding Screen Single Port Forwarding Enter the desired application type. Application External Port Traffic from the Internet using this port number will be sent to the Server. This is normally the same as the Internal Port Number.

  • Page 83: Port Range Forwarding

    Advanced Features Port Range Forwarding This feature allows you to make Servers on your LAN accessible to Internet users. Normally, Internet users would not be able to access a server on your LAN because: Port Range Forwarding Screen Data - Port Range Forwarding Screen Port Range Forwarding Enter the desired application type.

  • Page 84: Qos

    Advanced Features The QoS (Quality of Service) feature allows you specify priorities for different traffic. Lower priority traffic will be slowed down to allow greater throughput or less delay for high priority traffic. An example QoS screen is shown below. QoS Screen Data - QoS Screen QoS Setting...
  • Page 85 Advanced Features Applications: Category  Add a New Application (Once selected, please complete the following setups.)  Ip/Net: Enter the IP address.  Rate: Enter the desired rate value.  Priority: Select the desired option (High, Normal, Low)  Direct: Select Upstream or Downstream as required. ...

  • Page 86: Chapter 7 Advanced Administration

    Chapter 7 Advanced Administration This Chapter explains the settings available via the "Administration" section of the menu. Overview Normally, it is not necessary to use these screens, or change any settings. These screens and settings are provided to deal with non-standard situations, or to pro- vide additional options for advanced users.

  • Page 87: Pc Database

    Advanced Administration PC Database The PC Database is used whenever you need to select a PC (e.g. for the "DMZ" PC).  It eliminates the need to enter IP addresses.  Also, you do not need to use fixed IP addresses on your LAN. However, if you do use a fixed IP address on some devices on your LAN, you should enter details of each such device into the PC database, using the PC Data- base screen.
  • Page 88 Advanced Administration PC Database (Admin) This screen is displayed if the "Advanced " button on the PC Database is clicked. It provides more control than the standard PC Database screen. PC Database (Admin) Data - PC Database (Admin) Screen Known PCs This lists all current entries.
  • Page 89 Advanced Administration Select the appropriate option: IP Address  Automatic - The PC is set to be a DHCP client (Windows: "Obtain an IP address automatically"). The Wireless Router will allocate an IP address to this PC when requested to do so.

  • Page 90: Config File

    Advanced Administration Config File This feature allows you to download the current settings from the Wireless Router, and save them to a file on your PC. You can restore a previously-downloaded configuration file to the Wireless Router, by uploading it to the Wireless Router. This screen also allows you to set the Wireless Router back to its factory default configuration.

  • Page 91: Logs

    Advanced Administration Logs The Logs record various types of activity on the Wireless Router. This data is useful for troubleshooting, but enabling all logs will generate a large amount of data and adversely affect performance. Since only a limited amount of log data can be stored in the Wireless Router, log data can also be E-mailed to your PC.
  • Page 92 Advanced Administration Data - Logs Screen Logs Current Time The current time on the Wireless Router is displayed. Log Data Current log data is displayed in this panel. There are three (3) buttons Buttons  Refresh - Update the log data. ...

  • Page 93: E-Mail

    Advanced Administration E-Mail This screen allows you to E-mail Logs and Alerts. A sample screen is shown below. E-Mail Screen Data - E-Mail Screen E-Mail Notification Turn E-mail Check this box to enable this feature. If enabled, the E-mail address information (below) must be provided. Notification on Enter the E-mail address the Log is to be sent to.
  • Page 94 Advanced Administration If you have enabled "My SMTP Mail Server requires authentica- User Name tion" above, enter the User Name required to login to your SMTP Server. If you have enabled "My SMTP Mail Server requires authentica- Password tion" above, enter the password required to login to your SMTP Server.

  • Page 95: Diagnostics

    Advanced Administration Diagnostics This screen allows you to perform a "Ping" or a "DNS lookup". These activities can be useful in solving network problems. An example Network Diagnostics screen is shown below. Network Diagnostics Screen Data - Network Diagnostics Screen Ping IP Address Enter the IP address you wish to ping.

  • Page 96: Remote Administration

    Advanced Administration Remote Administration If enabled, this feature allows you to manage the Wireless Router via the Internet. Remote Administration Screen Data - Remote Administration Screen Remote Administration Check to allow administration/management via the Internet. (To Enable Remote connect, see below). Management If Disabled, this device will ignore Administration connection attempts from the Internet.
  • Page 97 Advanced Administration To connect from a remote PC via the Internet 1. Ensure your Internet connection is established, and start your Web Browser. 2. In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the Wireless Router. If the port number is not 80, the port number is also required. (After the IP Address, enter ":"...

  • Page 98: Routing

    Advanced Administration Routing Overview  If you don't have other Routers or Gateways on your LAN, you can ignore the "Routing" page completely.  If the Wireless Router is only acting as a Gateway for the local LAN segment, ignore the "Routing" page even if your LAN has other Routers. ...
  • Page 99 Advanced Administration Routing Screen Data - Routing Screen RIP Direction Select the desired RIP Direction. Choose the RIP Version for the Server. RIP Version Static Routing Static Routing This list shows all entries in the Routing Table. Table Entries  This area shows details of the selected item in the list.
  • Page 100 Advanced Administration Configuring Other Routers on your LAN It is essential that all IP packets for devices not on the local LAN be passed to the Wireless Router, so that they can be forwarded to the external LAN, WAN, or Internet.
  • Page 101 Advanced Administration For the Wireless Router's Routing Table For the LAN shown above, with 2 routers and 3 LAN segments, the Wireless Rou- ter requires 2 entries as follows. Entry 1 (Segment 1) Destination IP Address 192.168.1.0 Network Mask 255.255.255.0 (Standard Class C) Gateway IP Address 192.168.0.100 (Wireless Router's local Router)

  • Page 102: Upgrade Firmware

    Advanced Administration Upgrade Firmware The firmware (software) in the Wireless Router can be upgraded using your Web Browser. You must first download the upgrade file (http://www.level1.com), then select Up- grade Firmware on the Administration menu. You will see a screen like the following. Router Upgrade Screen To perform the Firmware Upgrade: 1.

  • Page 103: Chapter 8 Access Point Mode

    Chapter 8 Access Point Mode This Chapter explains configuration and operation when in "Access Point". Overview There are two modes available on the Access Point screen.  Router - In this mode, this device can provide shared Internet Access to all your LAN users.

  • Page 104: Mode Screen

    Access Point Mode Mode Screen Mode Screen Data - Mode Screen This field displays the current name of this device. Device Name Select the desired device mode for the router: Device Mode  Router - In this mode, this device can provide shared Internet Access to all your LAN users.

  • Page 105: Appendix A Troubleshooting

    Appendix A Troubleshooting This Appendix covers the most likely problems and their solutions. Overview This chapter covers some common problems that may be encountered while using the Wireless Router and some possible solutions to them. If you follow the sug- gested steps and the Wireless Router still does not function properly, contact your dealer for further advice.

  • Page 106: Wireless Access

    Appendix A - Troubleshooting Problem 2: Some applications do not run properly when using the Wireless Router. Solution 2: The Wireless Router processes the data passing through it, so it is not transparent. For incoming connections, you must use the Virtual Server or Firewall Rules to specify the PC which will receive the incoming traffic.
  • Page 107 Problem 2: Wireless connection speed is very slow. Solution 2: The wireless system will connect at the highest possible speed, depending on the distance and the environment. To obtain the high- est possible connection speed, you can experiment with the following: ...

  • Page 108: Appendix B About Wireless Lans

    Appendix B About Wireless LANs This Appendix provides some background information about using Wireless LANs (WLANs). Modes Wireless LANs can work in either of two (2) modes:  Ad-hoc  Infrastructure Ad-hoc Mode Ad-hoc mode does not require an Access Point or a wired (Ethernet) LAN. Wireless Stations (e.g.

  • Page 109: Channels

    Appendix B - About Wireless LANs Channels The Wireless Channel sets the radio frequency used for communication.  Access Points use a fixed Channel. You can select the Channel used. This allows you to choose a Channel which provides the least interference and best performance.

  • Page 110: Wpa2-Psk

    Appendix B - About Wireless LANs WPA2-PSK This is a later version of WPA (WPA-PSK). The major change is the use of AES (Advanced Encryption System) for protecting data. AES is very secure, considered to be unbreakable. The PSK (Pre-shared Key) must be entered on each Wireless station.

  • Page 111: Wireless Lan Configuration

    Wireless LAN Configuration To allow Wireless Stations to use the Access Point, the Wireless Stations and the Access Point must use the same settings, as follows: Mode On client Wireless Stations, the mode must be set to "Infrastruc- ture". (The Access Point is always in "Infrastructure" mode.) SSID (ESSID) Wireless Stations should use the same SSID (ESSID) as the Access Point they wish to connect to.

  • Page 112: Appendix C Specifications

    Appendix C Specifications Multi-Function Wireless Router WBR-3408 – 11g Wireless Broadband Router Model WBR-3408 – Roteador banda-larga sem fio - Wireless G Dimensions 125mm(W) * 109mm(D) * 30mm(H) Operating Tempera- 0 C to 40 C ture Storage Temperature -20 C to 70 C...

Table of Contents