LevelOne WBR-1101TX User Manual page 52

5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows setting. Using this is recommended. By default, the LevelOne WBR-1101TX will
act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the LevelOne WBR-1101TX.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
•
In the Default gateway field, enter the LevelOne WBR-1101TX's IP address and click OK.
Your LAN administrator can advise you of the IP Address they assigned to the LevelOne
WBR-1101TX.
•
If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
Figure 29: TCP/IP Properties (Windows XP)
PC Configuration
49