2. In the "Address" bar, enter "HTTP://" followed by the WAN IP Address of the LevelOne
WBR-1101TX. If the port number is not 80, the port number is also required. (After the IP
Address, enter ":" followed by the port number.)
e.g.
HTTP://123.123.123.123:8080
This example assumes the WAN IP Address is 123.123.123.123, and the port number is
8080.
Routing Table
This link provides access to a standard static routing table.
Configuration is only required if your LAN contains other routers.
Refer to Chapter 8 - Routing for further details about Router configuration and using the
Router screen.
Printer Port
This link will reveal the Printer Port screen, as shown below. Most users do not need to
change these settings.
Data - Printer Port Screen
AppleTalk
AppleTalk Zone
Printer Object Type
Figure 40: Printer Port Screen
This determines which Apple systems can gain access to this
printer. The default value is *, which allows access by all sys-
tems. If you enter another zone name, only Apple systems in that
zone will be able to access the printer.
Sets the type of printer attached. The default setting is "Laser-
Writer". Other printers have not been tested, and may not work.
Options
73