Connecting To The Virtual Servers - LevelOne WBR-1101TX User Manual

LevelOne WBR-1101TX User Guide
Internal Port Enter the port number used by the Server to connect to clients.
Number
The port number used by clients when connecting to the Server. This is
External Port
Number normally the same as the Internal Port Number.
If it is different, this device will perform a "mapping" or "translation"
function, allowing the server to use one port address, while clients use a
different port address.
Buttons
Clears all data, ready for input of a new entry.
Clear Form
Add Add a new entry, using the data shown on screen.
The name shown in the drop-down list is ignored.
Delete Delete the Virtual Server entry selected in the drop-down list, regardless
of whether its details are shown on screen.
Update the Virtual Server entry selected in the drop-down list, using the
Update
data shown on screen.
List All List all User-defined Virtual Servers.
Reverse any changes made since the last "submit" operation (i.e. since
Cancel
clicking any other button).

Connecting to the Virtual Servers

Once configured, anyone on the Internet can connect to your Virtual Servers. They must use
the WAN Port IP Address (the IP Address allocated to this device by your ISP).
e.g.
http://203.70.212.52
ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dynamic.
If using a Fixed IP Address, it is entered on the WAN screen.
From the Internet, ALL Virtual Servers have
the IP Address allocated by your ISP, as
shown by the "WAN IP Address".
90