Table of Contents
Advertisement
LevelOne WBR-1101TX User Guide
4. Operate DIP switch 1 in the following sequence (you have 15 seconds to complete the
sequence):
•
OFF
•
ON
•
OFF
5. The LevelOne WBR-1101TX will now reset, and the Red Status LED flash. The follow-
ing changes will have been made. (Other configuration data is unchanged.)
•
IP Address set to its default value of 192.168.0.1
•
Network Mask set to 255.255.255.0
•
DHCP Server is enabled, and will allocate IP Addresses in the range 192.168.0.2 to
192.168.0.51.
•
The password cleared (no password).
6. You can now connect to the LevelOne WBR-1101TX and make any configuration
changes required.
8
Advertisement
Table of Contents
