Printer Status - LevelOne WBR-1101TX User Manual

LevelOne WBR-1101TX User Guide
Communication
Protocol
Logical Printers
No (L1, L2, L3)
Pre-string (HEX)
Post-string (HEX)
LF to CR/LF

Printer Status

Printer Status
"Refresh" Button
You must use the same setting as your Macintosh.
There are 3 Logical Printers (Ports), named L1, L2, and L3.
These names can not be changed, and must be used when select-
ing the logical printer from your Unix system.
Enter (in HEX) the series of printer commands to be sent to the
attached printer BEFORE each print job.
Enter (in HEX) the series of printer commands to be sent to the
attached printer AFTER each print job.
If checked, Unix-style LF (line feed) characters at the end of each
line will be converted to CR/LF (carriage return/line feed) pairs,
as used in MSDOS and Windows.
This indicates the current status of the printer. Possible values
are:
•
Idle
•
Printing
•
Off-line
•
Out of paper
Click this to update the printer status information
74