Access Control Log - LevelOne WBR-1101TX User Manual

1 port wireless broadband/isdn router
Table of Contents

Advertisement

DHCP Table
System
System Data
Firmware Version
Printer Status
WAN Links
WAN (Ethernet)
Port
ISDN
Serial Port

Access Control Log

Internet Access Log
Access Control Log
This log shows connection requests which have been blocked by the
or the built-in NAT Firewall.
Accesses which have been blocked for other reasons (e.g. URL filter, incorrect dial-in pass-
word, incorrect WEP settings on the WLAN) are NOT shown in this log. (The "Internet
Use this link to view the IP Addresses which have been allocated to
LAN devices, or the Dial-in user, by the DHCP Server function.
The DHCP Table contains the following data:
Port - The port which the DHCP client used to access this
device. Possible values are LAN, WLAN (Wireless LAN), and
RS232 (serial port).
IP Address - The IP Address which has been allocated by the
DHCP server to the DHCP client.
Physical (Hardware) Address - The Physical Address
(Hardware Address) of the DHCP client which has been allo-
cated this IP Address.
Status - Possible Status values are "Leased" (the IP Address is
allocated to the device shown) or "Reserved" (the IP Address
is reserved for this device, but not currently allocated).
"Reserved" entries are generated for the Dial-in User, and for any
PCs for which an IP Address has been reserved. An IP Address can
be reserved for a particular PC using the Access Control - PCs
screen. The Access Control feature is described in Chapter 10.
This is identical to the data shown on a "Diagnostic Printout", and
contains all system information.
The version of the firmware currently installed in this device.
This shows the status of the printer. Click the "Refresh Screen"
button to update this information.
View the WAN (Ethernet) status screen. This screen will vary
according to the connection method used (Direct connection or
PPPoE).
See the following sections WAN Status - Direct Connection and
WAN Status - PPPoE for details.
Check the status of the ISDN link, if used. See the following
section for details.
Check the status of the Serial Port. See the following section for
details.
View details of connection attempts which have been blocked. See
below for more information.
View details of outgoing connections to the internet. See below for
more information.
Configuration
Access Control
feature
29

Advertisement

Table of Contents
loading

Table of Contents