Specify An Ip Address - LevelOne WBR-1101TX User Manual

LevelOne WBR-1101TX User Guide
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify
an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the LevelOne
WBR-1101TX will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the LevelOne WBR-1101TX.

Specify an IP Address

If your PC is already configured, check with your network administrator before making the
following changes.
1. The Default Gateway must be set to the IP address of the LevelOne WBR-1101TX. To set
this:
•
Click the Advanced button on the screen above.
•
On the following screen, click the Add button in the Gateways panel, and enter the
LevelOne WBR-1101TX's IP address, as shown in Figure 24 below.
•
If necessary, use the Up button to make the LevelOne WBR-1101TX the first entry in
the Gateways list.
Figure 23: Windows NT4.0 - IP Address
44