LevelOne WBR-1101TX User Manual page 37

LevelOne WBR-1101TX User Guide
WAN Status - PPTP
If using PPTP to connect to your ISP, the following screen will be displayed.
WAN Status
Physical Address
IP Address
PPTP Status
Connection Log
Connection Log
Buttons
Clear Log
Connect
Disconnect
Refresh
Figure 15: WAN Status - PPTP
The hardware address of this device, as seen from the Internet.
The IP Address of this device, as seen from the Internet.
This indicates the status of the connection to the PPTP Server.
If the connection does not exist, the Connect button can be used to
establish a connection. If the connection currently exists, the Discon-
nect button can be used to break the connection.
This log shows detailed information regarding the PPTP connection.
This data is useful for troubleshooting. Otherwise, it can be ignored.
The "Clear Log" button can be used to re-start the log, making new
messages easier to read.
Delete all data currently in the Log. This will make it easier to read
new messages.
If not connected, establish a connection to your ISP.
If connected to your ISP, hang up the connection.
Contact this device and update the Log data.
34