Router Configuration - LevelOne WBR-1101TX User Manual

Add
Delete
Update
List All
Save
Cancel

Router Configuration

It is essential that all IP packets for devices not on the local LAN be passed to the LevelOne
WBR-1101TX, so that they can be forwarded to the Internet. To achieve this, the local LAN
must be configured to use the LevelOne WBR-1101TX as the Default Route or Default Gate-
way.
Local Router
The local router is the Router installed on the same LAN segment as the LevelOne WBR-
1101TX. This router requires that the Default Route is the LevelOne WBR-1101TX itself.
Typically, routers have a special entry for the Default Route. It should be configured as fol-
lows.
Destination IP Address
Network Mask
Gateway IP Address
Metric
Other Routers on the Local LAN
Other routers on the local LAN must use the LevelOne WBR-1101TX's Local Router as the
Default Route. The entries will be the same as the LevelOne WBR-1101TX's local router, with
the exception of the Gateway IP Address.
•
For a router with a direct connection to the LevelOne WBR-1101TX's local Router, the
Gateway IP Address is the address of the LevelOne WBR-1101TX's local router.
•
For routers which must forward packets to another router before reaching the LevelOne
WBR-1101TX's local router, the Gateway IP Address is the address of the intermediate
router.
Add a new entry to the Routing table, using the data shown on screen.
The name shown in the drop-down list is ignored.
Delete the entry selected in the drop-down list, regardless of whether its
details are shown on screen.
Update the entry selected in the drop-down list, using the data shown on
screen.
List all entries in the Routing table.
Save the RIP setting. This has no effect on the Static Routing Table.
Reverse any changes made since the last "submit" operation (i.e. since
clicking any other button).
Normally 0.0.0.0, but check your router documentation.
Normally 0.0.0.0, but check your router documentation.
The IP Address of the LevelOne WBR-1101TX.
1
Routing
77