Table of Contents
Advertisement
Chapter 3
Configuration
This Chapter provides details of the configuration process.
Overview
This chapter describes the procedure for:
•
Quick setup (Internet access and LAN)
•
Wireless access point configuration
•
Using the Status screens
PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Con-
figuration.
Other configuration may also be required, depending on which features and functions of the
LevelOne WBR-1101TX you wish to use. Use the table below to locate detailed instructions
for the required functions.
To Do this:
Configure PCs on your LAN.
Learn more about using DHCP on the local LAN.
Configure and use the Serial (RS232) port for Dial-in access to your
LAN..
Configure various options:
•
Set a password for the LevelOne WBR-1101TX, to protect the
configuration data.
•
Disable NAT (Network Address Translation),
•
Enable TFTP firmware upgrade feature.
•
Configure Remote Management (configure via the Internet)
•
Access the Printer Port setup screen.
Configure the LevelOne WBR-1101TX and other routers for a LAN
which already has 1 or more routers.
Use any of the following features:
•
Special Internet Applications
•
URL Filter
•
Virtual Servers
•
DMZ
Limit Internet Access by individual workstations.
3
Refer to:
Chapter 4:
PC Configuration
Chapter 5:
DHCP
Chapter 6:
Dial-in (Serial Port)
Chapter 7:
Options
Chapter 8:
Routing
Chapter 9:
Advanced Internet
Features
Chapter 10:
Access Control
11
Advertisement
Table of Contents
