LevelOne WBR-1101TX User Manual page 23

LevelOne WBR-1101TX User Guide
Configuration: WAN Port - PPTP
The following screen will be displayed if "WAN Port - PPTP" is selected (on the Quick Setup
screen) and the "Configuration" button is clicked.
(If using Internet Explorer, the Fixed IP address fields are not displayed unless this option is
selected.)
WAN Port - PPTP
User Name
Password
Verify Password
PPTP Server IP
Address
Connect as
required
Disconnect
Figure 8: PPTP screen
Enter the Username provided by your ISP. This is used to "Login" to
the PPTP Serer.
Enter the password provided by you ISP. This is used to "Login" to
the PPTP Serer.
Re-enter the password provided by you ISP, to ensure it is correct.
Enter the IP Address of the PPTP Server provided by you ISP.
•
Check this to have the connection established as required, when
an Internet connection is requested.
•
If not checked, a connection must be established using the
"Connect" button on the "Status" screen.
•
If checked, an idle connection will be terminated after the time
specified.
•
If not checked, a connection will remain in effect until termi-
nated by the remote server, or disconnected using the
"Disconnect" button on the "Status" screen.
20