Physical Details - LevelOne FBR-1800TX User Manual

LevelOne FBR-1800TX Broadband Router User Guide

Physical Details

Front-mounted LEDs
Power On - Power on.
Off - No power.
Status (Red) On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up.
Print Act On - Connection to printer established.
Off - No connection to printer; printer is Off or Off-line.
Flashing - Data is being transmitted to the printer.
Print Error On - Printer error detected.
Off - No printer error detected.
WAN Link/Act - Connection to the modem attached to the WAN (Internet) port
is established.
100 - Corresponding WAN port is using 100BaseT.
For each port, there are 2 LEDs
LAN
•
•
Figure 2: Front Panel
Link/Act
•
On - Corresponding LAN (hub) port is active.
•
Off - No active connection on the corresponding LAN (hub) port.
•
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
100
•
On - Corresponding LAN (hub) port is using 100BaseT.
•
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
4