LevelOne WBR-1101TX User Manual page 71

LevelOne WBR-1101TX User Guide
Data - Dial-in Users Screen
Existing Users
Dial-in Access
Other Users
New User
Name
Buttons
>>
<<
Del
Edit
Create
•
This lists all users who have Dial-in permission.
•
If no users have dial-in permission, this list will be empty.
•
Select the user or users you wish to change. Multiple users can be
selected by holding down the CTRL key while selecting. (For the
Macintosh, use the SHIFT key instead of CTRL).
•
This lists all users who do not have Dial-in access.
•
If you have not created any users, this list will contain the pre-
defined "guest" user.
•
Use the "Create" button on this screen to create new users as re-
quired.
•
Select the user or users you wish to change. Multiple users can be
selected by holding down the CTRL key while selecting. (For the
Macintosh, use the SHIFT key instead of CTRL).
Use this to create new users as required:
•
Enter the name for the new user here.
•
Spaces, punctuation, and special characters must NOT be used in
the name.
•
User names are case insensitive (case is ignored), so you can not
have 2 names which differ only by case.
•
The name can not be changed once the user is created.
Use the " >> " button to remove Dial-in access for any users selected in
the "Dial-in Users" list.
Use the " << " button to allow Dial-in access for any users selected in the
"Other Users" list.
Delete the selected user or users in the list above the button.
Modify the selected user in the list above the button. Only 1 user should
be selected.
This will add a new user to the database.
•
Enter the required user name in the "Name" field, then click the
Create button.
•
You will then see the "User Details" screen, where you can enter the
other details for this user.
68