LevelOne WBR-1101TX User Manual page 25

LevelOne WBR-1101TX User Guide
Password
Verify
IP Address from
ISP
DNS IP Address
Telephone
Disconnect after
Idle Time
ISDN - Setup
Country
SPID
Usage
Enter the current password for the above account
Re-enter the password in the Verify field, to ensure it is correct.
Select the appropriate option:
•
Dynamic This is the default, and the most common. Leave this
selected if your ISP allocates an IP Address to the LevelOne
WBR-1101TX upon connection.
•
Fixed IP Address Select this if your ISP has allocated you a
fixed IP Address, then enter the IP Address in the fields pro-
vided.
•
Enter the DNS IP address supplied or recommended by your
ISP.
•
If desired, additional DNS entries can be made on the Options
screen.
•
Enter the telephone number to dial to connect to your ISP
(Internet Service Provider).
•
Use the format described in your modem's user manual.
•
The Internet connection will be terminated after being idle for
the time specified.
•
A value of zero (0) will disable the Idle time-out; the connection
will never be terminated.
•
A list of countries is provided.
•
Select your country from the drop-down list. Note that the USA
has 4 entries, by Switch type. Your phone company can tell you
what switch type they use.
•
In the USA, this data is essential, and is provided by your phone
company.
In other countries, the SPID is normally not used.
•
Each B Channel has its own SPID.
•
If in the USA, enter the SPID values provided your phone
company.
•
Always use 1 B Channels - The 2
•
Dynamically use 2 B Channels - If the volume of traffic is low,
1 B Channel is used. When traffic volume is high, 2 B Channels
are used.
•
Always use 2 B Channels - Even if the volume of traffic is low,
the connection uses both B channels.
nd
B Channel is never used.
22